FAG Hand Pump Sets 1600 bar

These hand pump sets are suitable for hydraulically mounting and dismounting rolling bearings and for mounting pressfitted assemblies with contact pressures of up to 80 N/mm2, e.g. ship's rudder shafts and rudder blades.

FAG Hand Pump Sets 1600 bar

Pressure generators for the hydraulic method

FAG hand pump sets 1600 bar

These hand pump sets are suitable for hydraulically mounting and dismounting rolling bearings and for mounting pressfitted assemblies with contact pressures of up to 80 N/mm2, e.g. ship's rudder shafts and rudder blades. The oil containers have a volume of 4 l (8-litre containers also available on request). The pumps are connected by means of an HP tube (1600 bar, 2 m long) and a plug-in joint (1600 bar, for connecting thread holes G 1/4, see drawing on page 2). If two connections have to be supplied with oil simultaneously, the pump set is additionally fitted with a two-way valve. Oil supply is then effected through two high-pressure tubes and two plug-in joints. The pump sets are delivered ready for use in a metal box.

Hand pump set PUMPE1600.4L

(for 1 connection)

Scope of delivery:

1 hand pump (1600 bar) with a 4-litre oil container with an oil filling of Shell Voltol sliding oil 46 (viscosity 46 mm2/s at 40 °C)

1 attached pressure-gauge connecting piece

1 pressure gauge (0-1600 bar, dia 100 mm)

1 HP tube (1600 bar, 2 m long)

1 plug-in joint (1600 bar)

1 metal box 900 x 250 x 250 mm Mass (incl. oil filling and metal box) 25 kg

Hand pump set PUMPE1600.4L.V

(for 2 connections)

Scope of delivery:

1 hand pump (1600 bar) with a 4-litre oil container with an oil filling of Shell Voltol sliding oil (viscosity 46 mm2/s at 40 °C)

1 attached two-way valve (with pressuregauge connection)

1 pressure gauge (0-1600 bar, dia 100 mm) 2 HP tubes (1600 bar, 2 m long)

2 plug-in joints (1600 bar)

1 metal box 900 x 250 x 250 mm Mass (incl. oil filling and metal box) 28 kg