FAG Hand Pump Sets 2500 bar

These hand pump sets are suitable for hydraulically mounting and dismounting rolling bearings and for mounting pressfitted assemblies with high contact pressures of up to 125 N/mm2, e.g. gearwheels and couplings.

FAG Hand Pump Sets 2500 bar

Pressure generators for the hydraulic method

FAG hand pump sets 2500 bar

These hand pump sets are suitable for hydraulically mounting and dismounting rolling bearings and for mounting pressfitted assemblies with high contact pressures of up to 125 N/mm2, e.g. gearwheels and couplings. The oil containers have a volume of 4 l (8-litre containers also available on request). The pumps are connected by means of an HP tube (2500 bar, 2 m long) and an adapter or reduction adapter (dimensions and connecting hole, see drawing and table). If two connections have to be supplied with oil simultaneously, the pump set is additionally fitted with a two-way valve. Oil supply is then effected through two high-pressure tubes. The pump sets are delivered ready for use in a metal box.

Hand pump set PUMPE2500.4L

(for 1 connection)

Scope of delivery:

1 hand pump (2500 bar) with a 4-litre oil container with an oil filling of Shell Voltol sliding oil 46 (viscosity 46 mm2/s at 40 °C)

1 attached pressure-gauge connecting piece

1 pressure gauge (0-2500 bar, dia 100 mm)

1 HP tube (2500 bar, 2 m long)

1 closing nipple G 1/4

1 adapter G 1/4, and 3 reduction adapters (G 3/8, G 1/2, G 3/4)

1 metal box 940 x 280 x 280 mm Mass (incl. oil filling and metal box) 27 kg

Hand pump set PUMPE2500.4L.V

(for 2 connections)

Scope of delivery:

1 hand pump (2500 bar) with a 4-litre oil container with an oil filling of Shell Voltol sliding oil 46 (viscosity 46 mm2/s at 40 °C)

1 attached two-way valve (with pressure-gauge connection)

1 pressure gauge (0-2500 bar, dia 100 mm)

2 HP tubes (2500 bar, 2 m long)

2 closing nipples G 1/4 each 2 adapters G 1/4 and reduction adapters G 3/8, G 1/2, G 3/4

1 metal box 940 x 280 x 280 mm Mass (incl. oil filling and metal box) 30 kg